i would like to blind flash the stock bios in first before trying the unlocked bios. i was wondering to make a separate thread about this if my situation cannot be helped by using blind flash and flashing in the unlocked bios. it does take a good more than 30 seconds to start gradually spin up. the gt70-0nc laptop will not post, upon pressing the power button, the button will remain white led color, instead of changing to orange, the fan will immediately start spinning at normal noise, instead of a delay before turning to max speed.

In my situation right now, the discrete gpu also killed my onboard intell gpu also. The Target curve will only change the fan speed if the temperature reaches either the minimum or the maximum.No, if your discrete GPU dead, then you need unlock your bios, and then disable discrete GPU in bios. The difference between Target and Linear is what happens between the minimum and maximum temperatures. Read more: How to Prevent Computer Overheating and Keep Your PC Cool They will return to 0% if the temperature is 65 C or less. For example, in my curves, the fans will always spin at 100% speed if the temperature is 95 C. When the minimum or maximum temperature is reached for both of these cards, their corresponding speed will trigger. Next, you need to set a minimum speed and a maximum speed. Basically, you're telling the app, 'I want my temperature to never exceed X, but it's okay if it never goes below Y.' Both cards require you to set a minimum and a maximum temperature. First, let's focus on the Target and Linear cards since they're very similar to each other. I've already configured these cards to my personal preference. For case fans, you can use the hottest motherboard, CPU, or GPU sensor as it doesn't matter too much. For CPU fans, use one of your CPUrelated sensors (pick the one with the highest temperature to be safe).

Gt70 fan control